Engine Speed Signal Inspection
- CHECK VISUAL
At the engine start, the pointer on the tachometer fluctuates.
Is the fluctuation acceptable?
- YES : GO TO 2.
- NO : GO TO 3.
- CHECK ENGINE SPEED
Compare the engine speed and the values indicated in tachometer.
Does the engine speed correspond to the speed indicated?
- YES : Tachometer is OK.
- NO : Replace combination meter.
- CHECK ECM SYSTEM
Perform ECM self-diagnosis. Refer to "CONSULT-II FUNCTION (ENGINE) ".
OK or NG
- OK : Replace combination meter.
- NG : Perform "Diagnostic Procedure" for displayed DTC.