April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear View Camera Image

When A/T selector lever is reverse position, power is supplied

through backup lamp relay terminal 1
to A/T assembly terminal 7.

Then back-up lamp relay is energized

from backup lamp relay terminal 3
to rear view camera control unit terminal 4.

Then, rear view camera control unit is sent camera ON signal

through rear view camera control unit terminal 8
to rear view camera terminal 1.

An image taken by rear view camera is sent

through rear view camera terminals 3 and 4
to rear view camera control unit terminals 10 and 9.

Then an image is sent

through rear view camera control unit terminals 11 and 12
to display terminals 11 and 9.

Then composite synchronizing signal is sent

through rear view camera control unit terminal 14
to display terminal 10
for the display and the image.

An image of rear view will be projected on the display.