LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2006 >> Q45 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Q45 - DTC P1211 Through P2A03 >> DTC P1220 Fuel Pump Control Module (FPCM) >> DTC Confirmation Procedure >> Testing Condition: >> With Consult-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Make sure that "COOLAN TEMP/S" indicates less than 70°C (158°F). If not, cool down the engine.
  3. Start engine.
  4. Hold vehicle at the following conditions for 12 seconds.
    ENG SPEED REFERENCE CHART

    ENG SPEED 1,175 - 3,075 rpm
    VHCL SPEED SE More than 70 km/h (43 MPH)
    B/FUEL SCHDL 2.0 - 31.7 msec
    Selector lever Suitable position
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04074727Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals