Remote Control Entry Function Malfunction
REMOTE CONTROL ENTRY FUNCTION MALFUNCTION
| Symptom | Diagnoses service procedure |
|---|---|
| Door lock/unlock does not operate (other functions normal) when Intelligent Key remote controller button is operated. | 1. Check door lock/unlock setting |
| 2. Intelligent Key battery inspection | |
| 3. Check door unlock sensor | |
| 4. Check door switch | |
| 5. Replace BCM | |
| 6. Replace Intelligent Key unit | |
| Driver side selective door unlock function does not operate, when Intelligent Key remote controller button is operated. (All other remote control entry function is OK.) |
1. Check selective door unlock setting |
| 2. Replace BCM | |
| 3. Replace Intelligent Key unit | |
| Panic alarm (horn and headlamp) do not activate, when panic alarm button is continuously pressed. (All other remote control entry function is OK.) |
1. Check panic alarm mode |
| 2. Check headlamp function | |
| 3. Check horn function | |
| 4. Check IPDM E/R operation | |
| 5. Check key switch (Intelligent Key unit input) | |
| 6. Check ignition knob switch | |
| 7. Replace Intelligent Key unit | |
| Hazard lamps do not flash during door lock operation using Intelligent Key remote controller button operated. (Turn signal lamp operation is OK.) (All other remote control entry function is OK.) |
1. Check key reminder setting |
| 2. Replace BCM | |
| 3. Replace Intelligent Key unit | |
| Hazard lamps do not flash during door lock operation using Intelligent Key remote controller button operated. (Turn signal lamps do not operate.) |
Check hazard function |
| Intelligent Key warning buzzer does not sound during door lock/unlock operation using Intelligent Key remote controller button is operated. (All other remote control entry function is OK.) | 1. Check if the operation confirmation Intelligent Key warning buzzer was cancelled by the CONSULT-II settings change function |
| 2. Check Intelligent Key warning buzzer | |
| 3. Replace Intelligent Key unit |