Terminals and Reference Value for Rear View Camera Control Unit

TERMINALS AND REFERENCE VALUE FOR REAR VIEW CAMERA CONTROL UNIT

Terminals		Item	Condition		Reference value
Terminal No.	Wire color		Ignition switch	Operation
1	R/W	Battery power supply	OFF	-	Battery voltage
2	LG	Ignition power supply	ACC	-	Battery voltage
3	B	Ground	ON	-	Approx. 0 V
4	OR	Reverse signal input	ON	A/T selector lever R range position	Battery voltage
				A/T selector lever in other than R range position	Approx. 0 V
5	G/Y	CONTROL 1	ON	-	Approx. 0 V
6	PU	DDL	-	-	-
8	R/W	Camera power output	ON	A/T selector lever R range position	Approx. 6 V
9	-	Camera image input (-)	ON	-	Approx. 0 V
10	W	Camera image input (+)	ON	A/T selector lever R range position	Courtesy of NISSAN MOTOR CO., U.S.A.
11	-	Shield ground	-	-	-
12	L	Composite image output	ON	A/T selector lever R range position	Courtesy of NISSAN MOTOR CO., U.S.A.
14	R	Composite image synchronization signal output	ON	A/T selector lever R range position	Courtesy of NISSAN MOTOR CO., U.S.A.