Checking Equipment

When ordering the following equipment, contact your NISSAN/INFINITI distributor.

EQUIPMENT DESCRIPTION

Tool name	Description
NISSAN CONSULT-II CONSULT-II unit (Tester internal soft: Resident version 3.3.0) and accessories Program card UED06D and AEN06B (For NATS) CONSULT-II CONVERTER (Version oo17) "CONSULT-II Pigtail" Cable	Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION:

If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
If CONSULT-II CONVERTER is not connected with CONSULT-II, vehicle occur the "FAIL SAFE MODE" which is "LIGHT UP the HEAD LIGHT" and/or "COOLING FAN ROTATING" when CONSULT-II is started.
Previous CONSULT-II "I" and "Y" DLC-I and DLC-II cables should NOT be used anymore because their DDL connector pins can be damaged during cable swapping.

NOTE:

The CONSULT-II must be used in conjunction with a program card.
CONSULT-II does not require loading (Initialization) procedure.
Be sure the CONSULT-II is turned off before installing or removing a program card.