CONSULT-II Function (BCM): Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
DIAGNOSTIC TEST MODES
| BCM diagnosis position | Inspection items and diagnosis mode | Description | ||
|---|---|---|---|---|
| BCM C/U(1) | Self-diagnosis results | Carries out the self-diagnosis. | ||
| DATA MONITOR | Displays the input data to BCM on real-time basis. | |||
| CAN DIAG SUPPORT MNTR | Displays CAN communication system diagnosis, disabled transmission status, and communication status of each unit communicated with BCM. | |||
| MULTI REMOTE ENT | DATA MONITOR | Displays the input remote keyless entry system data to BCM on real-time basis. | ||
| ACTIVE TEST | Gives a drive to a load to check the operation. | |||
| WORK SUPPORT | Changes the setting for each function. | |||
|
||||