CONSULT-II Function (AUTO DRIVE POS.): Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II FUNCTION (AUTO DRIVE POS.)
| CONSULT-II diagnosis items |
Inspection item, self-diagnosis mode |
Content |
| AUTO DRIVE POSITIONER |
WORK SUPPORT |
Changes the setting for each function. |
| SELF-DIG RESULTS |
Check the self-diagnosis results. |
| DATA MONITOR |
Selection from menu |
Displays the input data to driver seat control unit and automatic driving positioned control unit on real-time basis. |
| CAN DIAGNOSTIC SUPPORT MONITOR |
The results of transmit / receive diagnosis of CAN communication can be read |
| ACTIVE TEST2 |
Gives a drive signal to a load to check the operation. |
| DRIVER SEAT CONTROL UNIT PART NUMBER |
Displays driver seat control unit part No. |
| BCM |
DATA MONITOR |
Selection from menu |
Displays the input data to BCM on real-time basis |