April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Front Power Window Motor (Driver Side) Circuit

CHECK POWER WINDOW MAIN SWITCH OUTPUT SIGNAL

Turn ignition switch ON.
Check voltage between power window main switch connector and ground.

Fig 1: Identifying Voltage Between Power Window Main Switch Connector And Ground

G04918690

Courtesy of NISSAN MOTOR CO., U.S.A.

POWER WINDOW MAIN SWITCH OUTPUT SIGNAL

Connector	Terminals (Wire color)		Window condition	Voltage [V] (Approx.)
Connector	(+)	(-)	Window condition	Voltage [V] (Approx.)
D6	8 (L)	Ground	UP	Battery voltage
	8 (L)		DOWN	0
	11 (B)		UP	0
	11 (B)		DOWN	Battery voltage

OK or NG

OK: GO TO 2.

NG: Replace power window main switch.

CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect power window main switch and front power window motor (driver side) connector.
3. Check continuity between power window main switch connector D6 terminal 8, 11 and front power window motor (driver side) connector D8 terminal 1, 2.
  8 (L) - 2 (L) : Continuity should exist.
  
  11 (B) - 1 (B) : Continuity should exist.
  
  Fig 2: Identifying Continuity Between Power Connector D6 Terminal 8, 11 And Front Power Window Motor Connector D8 Terminal 1, 2
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG

OK: Replace front power window motor (driver side).

NG: Repair or replace harness.