LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction (Coupe) >> Basic Service Procedure >> Exhaust Valve Timing Control Learning (M/T models) >> Operation Procedure >> With CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-II

  1. Start engine and warm it up to normal operation temperature.
  2. Set shift lever in neutral position and confirm that following electrical or mechanical loads are not applied.
    • Headlamp switch is OFF
    • Air conditioner switch is OFF
    • Rear defogger switch is OFF
    • Steering wheel is in the straight-ahead position, etc
  3. Keep the engine speed between 1, 800 and 2, 000 rpm.
  4. Select "EXH V/T CONTROL LEARN" in "WORK SUPPORT" mode with CONSULT-II.
    Fig 1: CONSULT-II Display - WORK SUPPORT
    G04179501Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "START" and wait 20 seconds.
  6. Make sure that "CMPLT" is displayed on CONSULT-II screen.

    Learning completed : CMPLT 

    Learning not yet : YET 

    Fig 2: CONSULT-II Display - WORK SUPPORT
    G04179502Courtesy of NISSAN MOTOR CO., U.S.A.