Physical Values

POWER WINDOW MAIN SWITCH

PHYSICAL VALUES

Terminal No.		Wire color	Description		Condition	Voltage [V] (Approx.)
+	-	Wire color	Signal name	Input/Output	Condition	Voltage [V] (Approx.)
1	Ground	W	Rear power window motor LH UP signal	Output	When rear LH switch in power window main switch is UP at operated.	Battery voltage
2	Ground	LG	Encoder ground	-	-	0
3	Ground	GR	Rear power window motor LH DOWN signal	Output	When rear LH switch in power window main switch is DOWN at operated.	Battery voltage
4	Ground	Y	Door key cylinder switch LOCK signal	Input	Key position (Neutral → Locked)	5 → 0
5	Ground	O	Rear power window motor RH DOWN signal	Output	When rear RH switch in power window main switch is DOWN at operated.	Battery voltage
6	Ground	Y	Door key cylinder switch UNLOCK signal	Input	Key position (Neutral → Unlocked)	5 → 0
7	Ground	BR	Rear power window motor RH UP signal	Output	When rear RH switch in power window main switch is UP at operated.	Battery voltage
8	11	L	Front driver side power window motor UP signal	Output	When front LH switch in power window main switch is UP at operated.	Battery voltage
9	2	O	Encoder pulse signal 2	Input	When power window motor operates.
10	Ground	SB	Rap signal	Input	IGN SW ON	Battery voltage
					Within 45 second after ignition switch is turned to OFF	Battery voltage
					When driver side or passenger side door is opened during retained power operation	0
11	8	G	Front driver side power window motor DOWN signal	Output	When front LH switch in power window main switch is DOWN at operated.	Battery voltage
13	2	P	Encoder pulse signal 1	Input	When power window motor operates.
14	Ground	V	Power window serial link	Input/Output	IGN SW ON or power window timer operating.
15	Ground	B	Encoder power supply	Output	When ignition switch ON or power window timer operates.	10
17	Ground	B	Ground	-	-	0
19		Y	Battery power supply	Input	-	Battery voltage