Specifications Index
G35 COUPE & SEDAN SPECIFICATIONS INDEX
| System | Specification/Procedure | |||
|---|---|---|---|---|
| Air Conditioning | ||||
| Service | ||||
| Coupe | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Sedan | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Torque | ||||
| Coupe | Refer to applicable components in AUTOMATIC AIR CONDITIONER - COUPE article. | |||
| Sedan | Refer to applicable components in ON-VEHICLE REPAIR article. | |||
| Axle Nut/Hub Nut | ||||
| Coupe | ||||
| Front Hub Nuts | 88.3 N.m (65 ft. lbs.) | |||
| Rear Axle Nut | 206-274 N.m (152-202 ft. lbs.) | |||
| Sedan | ||||
| Front Axle Nut (AWD) | 125 N.m (92 ft. lbs.) | |||
| Front Hub Nuts (2WD) | 88.3 N.m (65 ft. lbs.) | |||
| Rear Axle Nut | 175 N.m (129 ft. lbs.) | |||
| Battery | ||||
| Coupe & Sedan | BATTERY | |||
| Brakes | ||||
| Bleeding Sequence | ||||
| Coupe | BLEEDING BRAKE SYSTEM | |||
| Sedan | BLEEDING BRAKE SYSTEM | |||
| Disc Brakes | ||||
| Front | ||||
| Coupe | FRONT DISC BRAKE | |||
| Sedan | FRONT DISC BRAKE | |||
| Rear | ||||
| Coupe | REAR DISC BRAKE | |||
| Sedan | REAR DISC BRAKE | |||
| Torque | ||||
| Coupe | Refer to COMPONENTS | |||
| Sedan | Refer to applicable components under FRONT DISC BRAKE . | |||
| Charging | ||||
| Generator | ||||
| Coupe | ALTERNATOR | |||
| Sedan | ALTERNATOR | |||
| Torque | ||||
| Coupe | REMOVAL AND INSTALLATION | |||
| Sedan | Refer to applicable components under ON-VEHICLE REPAIR . | |||
| Drive Belts | ||||
| Adjustment | ||||
| Coupe | TENSION ADJUSTMENT | |||
| Sedan | DRIVE BELT AUTO TENSIONER AND IDLER PULLEY | |||
| Belt Routing | ||||
| Coupe | Refer to Checking Belt Deflection And Tension figure located under CHECKING DRIVE BELTS . | |||
| Sedan | Refer to View Of Drive Belts And Pulley figure located under DRIVE BELTS . | |||
| Engine Cooling | ||||
| General Service Specifications | ||||
| Coupe | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Sedan | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Radiator Cap Pressure | ||||
| Coupe | 78-98 kPa (0.8-1.0 kgf/cm2 , 11-14 psi) | |||
| Sedan | 122.3-151.7 kPa (1.2-1.5 kgf/cm2 , 18-22 psi) | |||
| Thermostat R & I | ||||
| Coupe | WATER INLET AND THERMOSTAT ASSEMBLY | |||
| Sedan | WATER INLET AND THERMOSTAT ASSEMBLY | |||
| Water Pump R & I | ||||
| Coupe | WATER PUMP | |||
| Sedan | WATER PUMP | |||
| Engine Mechanical | ||||
| Compression | ||||
| Coupe | GENERAL SPECIFICATIONS | |||
| Sedan | GENERAL SPECIFICATION | |||
| Oil Pressure | ||||
| Coupe & Sedan | ||||
| @ Idle | 100 kPa (1.0. kgf/cm2 , 14 psi) or more | |||
| @ 2000 RPM | 290 kPa (3.0 kgf/cm2 , 42 psi) on more | |||
| Overhaul | ||||
| Coupe | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Sedan | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Torque | ||||
| Coupe | Refer to applicable components in ENGINE MECHANICAL - COUPE article. | |||
| Sedan | Refer to applicable components in ENGINE MECHANICAL - SEDAN article. | |||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. Also, refer to Technical Service Bulletin INFINITI; SPECIAL AUTOMATIC TRANSMISSION FLUID REQUIREMENT . | |||
| Flywheel/Flex Plate (Drive Plate) Torque | ||||
| Coupe & Sedan | ||||
| AT & MT | 88 N.m (65 Ft. lbs.) | |||
| Fuel System | ||||
| Pressure | ||||
| Coupe & Sedan | At Idling: Approximately 350 kPa (3.57 kg/cm2 , 51 psi) | |||
| Fuel Pressure Test Procedure | ||||
| Coupe | FUEL PRESSURE CHECK | |||
| Sedan | FUEL PRESSURE | |||
| Fuel Filter Location | ||||
| Coupe & Sedan | In Tank Type | |||
| Ignition | ||||
| Firing Order & Cylinder Identification | ||||
| Coupe | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Sedan | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Ignition Wires (Resistance) | NA | |||
| Ignition Wires (Routing) | NA | |||
| Spark Plugs | ||||
| Coupe | SPARK PLUG | |||
| Sedan | SPARK PLUG | |||
| Starting | ||||
| Starter | ||||
| Coupe | STARTER | |||
| Sedan | STARTER MOTOR | |||
| Torque | ||||
| Coupe | REMOVAL AND INSTALLATION . | |||
| Sedan | STARTER MOTOR . | |||
| Wheel Alignment | ||||
| Adjustment Specifications | ||||
| Front | ||||
| Coupe | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Sedan | 2WD SERVICE DATA AND SPECIFICATIONS (SDS) 4WD SERVICE DATA AND SPECIFICATIONS (SDS) |
|||
| Rear | ||||
| Coupe | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Sedan | SERVICE DATA AND SPECIFICATIONS (SDS) | |||
| Torque | ||||
| Front | ||||
| Coupe | Refer to applicable components in FRONT SUSPENSION - COUPE article. | |||
| Sedan | Refer to applicable components in FRONT SUSPENSION - SEDAN article. | |||
| Rear | ||||
| Coupe | Refer to applicable components in REAR SUSPENSION - COUPE article. | |||
| Sedan | Refer to applicable components in REAR SUSPENSION - SEDAN article. | |||
| Wheel & Tire | ||||
| Lug Nut Torque | ||||
| Coupe & Sedan | 108 N.m (11 kg-m, 80 Ft. lbs) | |||
| How To Use Nissan/Infiniti Service Information | ||||
| Includes: Standard Bolt Torque Symbol Identification General Connector Info |
GENERAL INFORMATION - COUPE GENERAL INFORMATION - SEDAN |
|||