Active Test

ACTIVE TEST

Test item	Description
DOOR LOCK/UNLOCK	This test is able to check door lock/unlock operation. The all door lock actuators are locked when "LOCK" on CONSULT-II screen is touched. The all door lock actuators are unlocked when "ALL UNLK" on CONSULT-II screen is touched. The door lock actuator (driver side) is unlocked when "DR UNLK" on CONSULT-II screen is touched. The door lock actuator (passenger side) is unlocked when "AS UNLK" on CONSULT-II screen is touched. The trunk lid opener actuator is open when "TRUNK OPEN" on CONSULT-II screen is touched.
ANTENNA	This test is able to check Intelligent Key antenna operation. When the following conditions are met, hazard warning lamps flash. Inside key antenna (Instrument center) detects Intelligent Key, when "ROOM ANT1" on CONSULT-II screen is touched. Inside key antenna (Center console) detects Intelligent Key, when "ROOM ANT2" on CONSULT-II screen is touched. Inside key antenna (rear seat) detects Intelligent Key, when "ROOM ANT3" on CONSULT-II screen is touched. Inside key antenna (Trunk room) detects Intelligent Key, when "LAG ANT1" on CONSULT-II screen is touched. Outside key antenna (Driver side) detects Intelligent Key, when "DRIVER ANT" on CONSULT-II screen is touched. Outside key antenna (Passenger side) detects Intelligent Key, when "ASSIST ANT" on CONSULT-II screen is touched. Outside key antenna (Trunk room) detects Intelligent Key, when "BD/TR ANT" on CONSULT-II screen is touched.
OUTSIDE BUZZER	This test is able to check Intelligent Key warning buzzer operation. Intelligent Key warning buzzer sounds when "ON" on CONSULT-II screen is touched.
INSIDE BUZZER	This test is able to check warning chime into combination meter operation. Take away warning chime sounds when "TAKE OUT" on CONSULT-II screen is touched. Key warning chime sounds when "KEY WARN" on CONSULT-II screen is touched. P position warning chime sounds when "P RNG WARN" on CONSULT-II screen is touched. ACC warning chime sounds when "ACC WARN" on CONSULT-II screen is touched.
INDICATOR	This test is able to check warning lamp operation. "KEY" Warning lamp illuminates when "KEY IND ON" on CONSULT-II screen is touched. "KEY" Warning lamp flashes when "KEY IND FSH" on CONSULT-II screen is touched.
LCD	This test is able to check meter display information Engine start information displays when "BRAKE/P" on CONSULT-II screen is touched. Engine start information displays when "BRAKE/P/ON" on CONSULT-II screen is touched. Key ID warning displays when "KEY ID NG" on CONSULT-II screen is touched. Steering lock information displays when "STLCK RELES" on CONSULT-II screen is touched. P position warning displays when "P RNG IND" on CONSULT-II screen is touched. Intelligent Key insert information displays when "INSERT KEY" on CONSULT-II screen is touched. Intelligent Key low battery warning displays when "KEY BAT LOW" on CONSULT-II screen is touched. Take away from window warning displays when "TK AWAY WDW" on CONSULT-II screen is touched. Take away warning display when "TAKE AWAY" on CONSULT-II screen is touched. OFF position warning display when "IGN OFF WARN" on CONSULT-II screen is touched.
P RANGE	This test is able to check A/T device power supply A/T device power is supplied when "ON" on CONSULT-II screen is touched.
ENGINE SW ILLUMI	This test is able to check push-ignition switch illumination operation. Push-ignition switch illumination illuminates when "ON" on CONSULT-II screen is touched.
LOCK INDCATOR	This test is able to check LOCK indicator in push-ignition switch operation. LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT-II screen is touched.
ACC INDCATOR	This test is able to check ACC indicator in push-ignition switch operation. LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT-II screen is touched.
IGNITION ON IND	This test is able to check INGITION ON indicator in push-ignition switch operation. LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT-II screen is touched.
KEY SLOT ILLUMI	This test is able to check key slot illumination operation. Key slot illumination flash when "ON" on CONSULT-II screen is touched.