Fail-Safe Control
The encoder signal detects the up / down speed / detection of door glass. If the malfunction is detected to the encoder signal or the difference between the glass fully closed position (memorized in power window main switch or power window sub-switch) and the actual glass position is detected, it shifts into the fail-safe control
FAIL-SAFE CONTROL CHART
| DTC | Condition |
|---|---|
| Pulse sensor detects malfunction | During the glass opening/closing operation, a pulse signal is continuously detected for the specified terms or more |
| Both pulse sensors detect malfunction | During the glass opening/closing operation, both pulse signals are not detected for the specified values or more |
| Pulse direction malfunction | The following condition is detected for the specified values or more. The pulse signal (detected during glass open/close operation) detects the opposite direction to the driving direction of power window motor. |
| Glass recognized position malfunction 1 | During the glass opening/closing operation, the difference between the glass fully closed position (memorized in power window main switch or power window sub-switch) and the actual glass position is detected for the specified values or more. |
| Glass recognized position malfunction 2 | During the glass opening/closing operation, a pulse count is detected that is above the glass full stroke |
| Glass fully closed position not updated malfunction | Continuously perform the glass open/close operation (with the glass not fully closed) at the specified value (approx. 10 time) or more |
It is shifts into the fail-safe control, the initialization is not performed and the following function is not activated
- Auto up operation
- Anti-pinch function
It is shifts into the fail-safe control, performed the initialization to resume normal operation condition.