CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)

CHECK SELF-DIAGNOSTIC RESULT

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
Select "BCM" on "SELECT DIAG MODE" screen, and select "SELF-DIAG RESULTS".

Check display content in self-diagnostic results.

CONSULT-II DISPLAY CODE DESCRIPTION

CONSULT-II display code	Diagnosis item
U1000	TRANSMIT DIAG
	ECM
	METER / M&A
	MULTI AV
	IPDM E/R
	I - KEY
	TIRE-P

Contents displayed

No malfunction >> INSPECTION END

Malfunction in CAN communication system >> After printing the monitor items, go to "CAN System". Refer to "CAN SYSTEM SPECIFICATION CHART ".