Operation Condition
If the following conditions are not satisfied, memory switch operation is not performed.
- Ignition switch is in ON position.
- Driver side power seat switch, ADP steering switch and door mirror control switch are not operated.
- Seat memory switch and set switch are not operated.
- Output malfunction is not detected.
- CAN and UART communications are normal.
- A/T selector lever position is in P position.
- Detention switch malfunction is not detected.
[Detention switch malfunction is sensed when detention switch remains OFF, vehicle speed is higher than 7 km/H. (4 MPH).]
- Input voltage from tilt sensor and telescopic sensor are normal.
NOTE:
The memory operation operates following order.
MEMORY OPERATION
| Order of priority | Operated portion | ||
|---|---|---|---|
| 1(1) | Seat sliding | ||
| 2 | Steering telescopic | ||
| 3 | Steering wheel tilt | ||
| 4 | Seat reclining | ||
| 5 | Seat lifter (front) | ||
| 6 | Seat lifter (rear) | ||
|
|||