LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass, Window System & Mirrors >> Power Window System >> Check encoder Circuit (Driver Side)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check encoder Circuit (Driver Side)

  1. CHECK POWER WINDOW MOTOR (FRONT DRIVER SIDE) POWER SUPPLY 
    1. Turn ignition switch ON.
    2. Check voltage between power window motor (front driver side) connector and ground.
      VOLTAGE SPECIFICATION

      Terminal Voltage (V) (Approx.)
      (+) (-)
      Power window motor (front driver side) connector Terminal
      D12 4 Ground 10
      Fig 1: Checking Voltage Between Power Window Motor Connector And Ground
      G05212591

    OK or NG 

    OK: GO TO  3.

    NG: GO TO 2.

  2. CHECK HARNESS CONTINUITY 1 
    1. Turn ignition switch OFF.
    2. Disconnect power window main switch and power window motor (front driver side).
    3. Check continuity between power window main switch connector and power window motor (front driver side) connector.
      CONTINUITY SPECIFICATION

      A B Continuity
      Power window main switch connector Terminal Power window motor (front driver side) connector Terminal
      D10 15 D12 4 Yes
    4. Check continuity between power window main switch connector and ground.
      CONTINUITY SPECIFICATION

      A Ground Continuity
      Power window main switch connector Terminal
      D10 15 No

    OK or NG 

    OK: Replace power window main switch.

    NG: Repair or replace harness.

    Fig 2: Checking Continuity Between Power Window Main Switch Connector And Ground
    G05212592
  3. CHECK GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect power window motor (front driver side) connector.
    3. Check continuity between power window motor (front driver side) connector and ground.
      CONTINUITY SPECIFICATION

      Power window motor (front driver side) connector Terminal Ground Continuity
      D12 6 Yes

    OK or NG 

    OK: GO TO  5.

    NG: GO TO 4.

    Fig 3: Checking Continuity Between Power Window Motor Connector And Ground
    G05212593
  4. CHECK HARNESS CONTINUITY 2 
    1. Disconnect power window main switch connector.
    2. Check continuity between power window main switch connector and power window motor (front driver side) connector.
      CONTINUITY SPECIFICATION

      A B Continuity
      Power window main switch connector Terminal Power window motor (front driver side) connector Terminal
      D10 2 D12 6 Yes

    OK or NG 

    OK: Replace power window main switch.

    NG: Repair or replace harness.

    Fig 4: Checking Continuity Between Power Window Main Switch Connector And Power Window Motor Connector
    G05212594
  5. CHECK ENCODER SIGNAL 
    1. Connect power window motor (front driver side) connector.
    2. Turn ignition switch ON.
    3. Check signal between power window main switch connector and ground with oscilloscope.
      ENCODER SIGNAL REFERENCE CHART

      Terminals Signal (Reference value)
      (+) (-)
      Power window main switch connector Terminal
      D10 9 Ground Refer to following signal
      13
      Fig 5: Checking Signal Between Power Window Main Switch Connector And Ground With Oscilloscope
      G05212595
      Fig 6: Power Window Main Switch Graph
      G05212558

    OK or NG 

    OK: Replace power window main switch.

    NG: GO TO 6.

  6. CHECK HARNESS CONTINUITY 3 
    1. Turn ignition switch OFF.
    2. Disconnect power window main switch and power window motor (front driver side) connector.
    3. Check continuity between power window main switch connector and power window motor (front driver side) connector.
      CONTINUITY SPECIFICATION

      A B Continuity
      Power window main switch connector Terminal Power window motor (front driver side) connector Terminal
      D10 9 D12 3 Yes
      13 5
    4. Check continuity between power window main switch connector and ground.
      CONTINUITY SPECIFICATION

      A Ground Continuity
      Power window main switch connector Terminal
      D10 9 No
      13
      Fig 7: Checking Continuity Between Power Window Main Switch Connector And Ground
      G05212597

    OK or NG 

    OK: Replace power window motor (front driver side).

    NG: Repair or replace harness.

scientia non olet · About LEMON Manuals