Check power Window Motor (Front Driver Side) Circuit

1. Turn ignition switch ON.
2. Check voltage between power window main switch connector and ground.
   VOLTAGE SPECIFICATION
   
   

   Terminal			Window Condition	Voltage (V) (Approx.)
   (+)		(-)
   Power window main switch connector	Terminal
   D10	8	Ground	UP	Battery voltage
   			DOWN	0
   	11		UP	0
   			DOWN	Battery voltage

OK or NG 

OK: GO TO 2.

NG: Replace power window main switch.

Fig 1: Checking Voltage Between Power Window Main Switch Connector And Ground

1. Turn ignition switch OFF.
2. Disconnect power window main switch and power window motor (front driver side) connector.
3. Check continuity between power window main switch connector and power window motor (front driver side).
   CONTINUITY SPECIFICATION
   
   

   A		B		Continuity
   Power window main switch connector	Terminal	Power window motor (front driver side) connector	Terminal
   D10	8	D12	2	Yes
   	11		1

OK or NG 

OK: Replace power window motor (front driver side).

NG: Repair or replace harness.

Fig 2: Checking Continuity Between Power Window Main Switch Connector And Power Window Motor