Transmitter Wake-Up Operation
- With the Transmitter Activation Tool (J-45295) pushed against the front left transmitter, press the button for 5 seconds. See Figure. With ignition switch in ON position, as the warning light flashes as shown, the respective transmitter then must be woken up. See Fig 1.
- Register the ID of wheel that warning lamp flashes. When wake-up of registered wheel has been completed, the turn signal light blinks. See Fig 1.
- After completing wake up of all transmitters, make sure low tire pressure warning light goes out.
Courtesy of NISSAN MOTOR CO., U.S.A.