Inspection 1: RAS Control Unit Malfunction
- CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.
With CONSULT-II
SELF-DIAGNOSIS RESULTS REFERENCESelf-diagnostic results CONTROL UNIT [ABNORMAL1] [C1900] CONTROL UNIT [ABNORMAL2] [C1901] CONTROL UNIT [ABNORMAL3] [C1905] CONTROL UNIT [ABNORMAL5] [C1906] CONTROL UNIT [ABNORMAL4] [C1907] CONTROL UNIT [ABNORMAL7] [C1908] CONTROL UNIT [ABNORMAL6] [C1909] CONTROL UNIT [ABNORMAL8] [C1922] CONTROL UNIT [ABNORMAL5] [C1927] CONTROL UNIT [ABNORMAL9] [C1928] Without CONSULT-II
SELF-DIAGNOSIS RESULTS REFERENCEDTC (warning lamp blinks) 11 Is above displayed on self-diagnosis display?
Yes: Replace RAS control unit. Perform self-diagnosis again after replacing.
No: INSPECTION END