CONSULT-II Function (BCM): Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II FUNCTION (BCM)
| BCM diagnostic test item | Check item, diagnostic test mode | Content |
|---|---|---|
| Inspection by part | WORK SUPPORT | Changes setting of each function. |
| SELF- DIAG RESULTS | BCM performs self-diagnosis of CAN communication. | |
| DATA MONITOR | Displays the input data of BCM in real time. | |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. | |
| ACTIVE TEST | Gives a drive signal to a load to check the operation. | |
| ECU PART NUMBER | BCM part number can be read. |