Disassembly And Assembly Of Intelligent Key
- Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
- Insert a flat-blade screwdriver (A) wrapped with a close into the slit of the corner and twist it to separate the upper part from the lower part.
CAUTION:
- Be careful not to touch the circuit board or battery terminal.
- The key fob is water-resistant. However, if it does get wet, immediately wipe it dry.
- Replace the battery with new one.
- Align the tips of the upper and lower parts, and then push them together until it is securely closed.
CAUTION:
- When replacing battery, be sure to keep dirt, grease, and other foreign materials off the electrode contact area.
- After replacing the battery, check to make sure all Intelligent Key functions work normally.