Control When Operating Enable Conditions Not Met During Power Open/Close
CONTROL WHEN OPERATING ENABLE CONDITIONS NOT MET DURING POWER OPEN/CLOSE
| Items | Operation condition | Not met case | Control |
|---|---|---|---|
| A/T selector lever P position | P or N position with ignition ON or any position with ignition OFF | Other | Continue power open or close, but sounds warning chime. |
| Back door close switch | NEUTRAL | CANCEL | Cancels power open/close operation or door will release to manual mode. |
| Voltage drop | 11V or more | 11 > V > 9 | |
| 9 > V > reset voltage | |||
| reset voltage > V | No power function available | ||
| Handle switch | Normal (GND) | Error (OPEN) | No operation. Cancel power open/close release to manual. |
| Glass hatch | Closed | OFF | Cancels power door open operation, door will release to manual mode. |