Terminals and Reference Values for Rear View Camera Control Unit

REAR VIEW CAMERA CONTROL UNIT TERMINALS AND REFERENCE VALUES

Terminal No.	Wire color	Item	Condition		Reference value (V) (Approx.)
			Ignition switch	Operation
1	Y	Battery power	OFF	-	Battery voltage
2	V	ACC power	ACC	-	Battery voltage
3	B	Ground	ON	-	0
4	G/W	Reverse signal input	ON	A/T selector lever R position	Battery voltage
				A/T selector lever in other than R position	0
5	BR	AV Control	ON	A/T selector lever R position	0
				-	0
6	G/W	DDL	-	-	-
8	Y	Camera power output	ON	A/T selector lever R position	6
9	-	Camera image input (-)	ON	-	0
10	G	Camera image input (+)	ON	A/T selector lever R position
11	-	Shield ground	-	-	-
12	W	Composite image output	ON	A/T selector lever R position