Intake Valve Timing Control Position Sensor
- Disconnect intake valve timing control position sensor harness connector.
- Loosen the fixing bolt of the sensor.
- Remove the sensor.
- Visually check the sensor for chipping.
Courtesy of NISSAN NORTH AMERICA, INC.
- Check resistance as shown below.
RESISTANCE SPECIFICATION
| Terminal No. (Polarity) |
Resistance Ω [at 25°C (77°F)] |
| 3 (+) - 1 (-) |
Except 0 or ∞ |
| 2 (+) - 1 (-) |
| 3 (+) - 2 (-) |
- If NG, replace intake valve timing control position sensor.
Courtesy of NISSAN NORTH AMERICA, INC.