October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
ID Registration Without Transmitter Activation Tool
- With the ignition switch in OFF position, connect the CONSULT scan tool to the Data Link Connector (DLC). Turn ignition switch to ON position.
- Select "START (NISSAN BASED VHCL)".
- Touch "BCM" on "SELECT SYSTEM" screen.
- Select "AIR PRESSURE MONITOR" on "SELECT WORK ITEM" screen.
- Select "WORK SUPPORT" on "SELECT DIAG MODE" screen, and select "ID REGIST".
- Adjust the tire pressure to the specified values for ID registration, and drive the vehicle at 25 mph (40 km/h) or more for a few minutes. See ID REGISTRATION TIRE PRESSURE SPECIFICATIONS table.
ID REGISTRATION TIRE PRESSURE SPECIFICATIONS
| Tire Position |
Tire Pressure - psi (kPa) |
| Front Left |
36 (250) |
| Front Right |
33 (230) |
| Rear Right |
30 (210) |
| Rear Left |
27 (190) |
- After completing all ID registrations, press "END" to complete the procedure.
- Inflate all tires to specification.