Transfer Motor Relay Operation
TRANSFER MOTOR RELAY OPERATION CHART
| 4WD shift switch |
A/T selector lever position |
Vehicle speed (VSS) |
Accelerator pedal position |
Motor relay drive command |
| 2WD |
- |
- |
- |
OFF |
| 4H (LOCK) and 4LO |
"N" position |
0 |
- |
ON |
| "P" position |
0 |
0 - 0.07/8 |
OFF |
| 0.07/8 - 1/8 |
HOLD |
| 1/8 - MAX |
ON |
| Other than "R" position |
0 < VSS ≤ 50 km/h (31 MPH) |
- |
ON |
| 50 km/h (31 MPH) < VSS < 55 km/h (34 MPH) |
HOLD |
| 55 km/h (34 MPH) ≤ VSS |
OFF |
| "R" position |
- |
- |
ON |
| AUTO |
"R" position |
- |
- |
ON |
| "P" or "N" position |
0 |
0 - 0.07/8 |
OFF |
| 0.07/8 - 1/8 |
HOLD |
| 1/8 - MAX |
ON |
| 0 < VSS ≤ 50 km/h (31 MPH) |
- |
ON |
| 50 km/h (31 MPH) < VSS < 55 km/h (34 MPH) |
HOLD |
| 55 km/h (34 MPH) ≤ VSS |
OFF |
| Other than "R", "P" and "N" position |
0 < VSS ≤ 50 km/h (31 MPH) |
- |
ON |
| 50 km/h (31 MPH) < VSS < 55 km/h (34 MPH) |
HOLD |
| 55 km/h (34 MPH) ≤ VSS |
OFF |
- 4WD shift switch, PNP switch, Neutral-4LO switch, vehicle speed sensor and throttle position sensor are used in conjunction with the transfer motor.