ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT: Work Procedure
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" to save or print current vehicle specification. Refer to "CONFIGURATION (AV CONTROL UNIT): DESCRIPTION ".
NOTE: If "Before Replace ECU" can not be used, use the "Manual Configuration".: GO TO 2.
- REPLACE AV CONTROL UNIT
Replace AV control unit. Refer to "EXPLODED VIEW ".
: GO TO 3.
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Refer to "CONFIGURATION (AV CONTROL UNIT): WORK PROCEDURE ".
: GO TO 4.
- OPERATION CHECK
Check that the operation of the AV control unit is normal.
: WORK END