Work Procedure
WARNING:
Be careful of traffic conditions and safety around the vehicle when performing road test.
CAUTION:
Fully understand the following items well before the road test;
- Precautions: Refer to "PRECAUTION FOR BSW SYSTEM SERVICE ".
- System description: Refer to "SYSTEM DESCRIPTION ".
- Normal operating condition: Refer to "DESCRIPTION ".
- BSW SYSTEM ACTION TEST
- Drive the vehicle.
- Turn warning systems switch ON (warning systems ON indicator is ON).
- Check BSW operation according to the following table.
Vehicle condition/Driver's operation Action Warning systems ON indicator Vehicle speed (Approx.) [km/h (MPH)] Turn signal condition Status of vehicle detection within detection area Indication on the BSW indicator Buzzer OFF - - - OFF OFF ON Less than approx. 29 (18) - - OFF OFF Approx. 32 (20) or more - Vehicle is absent OFF OFF OFF Vehicle is detected ON OFF ON (vehicle detected direction) Before turn signal operates Vehicle is detected Vehicle is detected after turn signal operates OFF NOTE:- If vehicle speed exceeds approximately 32 km/h (20 MPH), BSW function operates until the vehicle speed becomes lower than approximately 29 km/h (18 MPH).
- Time shown in the figure above is approximate time.
: INSPECTION END