LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> Ecu Diagnosis Information >> BCM (Body Control Module) >> Fail-safe >> Fail-Safe Control By DTC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail-Safe Control By DTC

BCM performs fail-safe control when any DTC are detected.

Display contents of CONSULT Fail-safe Cancellation
B2190: NATS ANTENNA AMP Inhibit engine cranking Erase DTC
B2191: DIFFERENCE OF KEY Inhibit engine cranking Erase DTC
B2192: ID DISCORD BCM-ECM Inhibit engine cranking Erase DTC
B2193: CHAIN OF BCM-ECM Inhibit engine cranking Erase DTC
B2195: ANTI SCANNING Inhibit engine cranking Ignition switch ON → OFF
B2560: STARTER CONT RELAY Inhibit engine cranking 500 ms after the following CAN signal communication status becomes consistent
  • Starter control relay signal
  • Starter relay status signal
B2608: STARTER RELAY Inhibit engine cranking 500 ms after the following signal communication status becomes consistent
  • Starter motor relay control signal
  • Starter relay status signal (CAN)
B260A: IGNITION RELAY Inhibit engine cranking 500 ms after the following conditions are fulfilled
  • IGN relay (IPDM E/R) control signal: OFF (Battery voltage)
  • Ignition ON signal (CAN to IPDM E/R): OFF (Request signal)
  • Ignition ON signal (CAN from IPDM E/R): OFF (Condition signal)
B260F: ENG STATE SIG LOST Maintains the power supply position attained at the time of DTC detection When any of the following conditions are fulfilled
  • Power position changes to ACC
  • Receives engine status signal (CAN)
B2617: STARTER RELAY CIRC Inhibit engine cranking 1 second after the starter motor relay control inside BCM becomes normal
B2618: BCM Inhibit engine cranking 1 second after the ignition relay (IPDM E/R) control inside BCM becomes normal
B261E: VEHICLE TYPE Inhibit engine cranking BCM initialization
scientia non olet · About LEMON Manuals