LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (IPDM/Er) >> Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

  1. Disconnect the battery cable from the negative terminal.
  2. Remove the cowl top cover (RH). Refer to "EXPLODED VIEW ".
  3. Pull up the IPDM E/R assembly while pressing the pawls (A) on the back of the IPDM E/R cover B (1).
    Fig 1: Identifying Pawls And IPDM E/R Cover
    G05730931Courtesy of NISSAN DIESEL MOTOR CO., LTD.
  4. Remove the IPDM E/R cover A (1) while pressing the pawls (A) at the lower end of the IPDM E/R cover A.
  5. Disconnect the harness connector and remove the IPDM E/R (2).
    Fig 2: Identifying IPDM E/R Cover And Pawls
    G04889516Courtesy of NISSAN DIESEL MOTOR CO., LTD.
  6. Remove the bolts (A) and remove the bracket (1) from the vehicle.
    Fig 3: Identifying Bolts And Bracket
    G05975023Courtesy of NISSAN DIESEL MOTOR CO., LTD.
scientia non olet · About LEMON Manuals