LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Ventilation System) >> Precaution >> Compressor >> General Precautions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Precautions

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Plug all openings to prevent moisture and foreign matter from entering.
  • Store it in the same way at it is when mounted on the car when the compressor is removed.
  • Follow "Maintenance of Lubricant Quantity in Compressor" exactly when replacing or repairing compressor. Refer to MAINTENANCE OF LUBRICANT QUANTITY .
  • Keep friction surfaces between clutch and pulley clean. Wipe it off by using a clean waste cloth moistened with thinner if the surface is contaminated with lubricant.
  • Turn the compressor shaft by hand more than five turns in both directions after compressor service operation. This distributes equally lubricant inside the compressor. Let the engine idle and operate the compressor for one hour after the compressor is installed.
  • Apply voltage to the new one and check for normal operation after replacing the compressor magnet clutch.