Diagnosis Procedure

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION START
1. Turn ignition switch ON.
2. Check "Self diagnostic result" for IPDM E/R with CONSULT-III.
3. Touch "ERASE".
4. Perform DTC Confirmation Procedure.
  See DTC LOGIC .
Is the DTC B210B displayed again?

YES: Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .

NO: INSPECTION END