Diagnosis Procedure
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECTION START
- Turn ignition switch ON.
- Check "Self diagnostic result" with CONSULT-III.
- Touch "ERASE".
- Perform DTC Confirmation Procedure.
See DTC LOGIC .
Is the DTC B260F displayed again?
YES: GO TO 2.
NO: GO TO 3.
- REPLACE ECM
Replace ECM. Refer to DESCRIPTION .
INSPECTION END
- CHECK INTERMITTENT INCIDENT
Refer to INTERMITTENT INCIDENT .
INSPECTION END