Active Test
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Never perform the active test while driving.
- Active test cannot be started while the lane departure warning lamp is illuminated.
OPERATION DESCRIPTION
| Active test item | Operation | Description |
|---|---|---|
| BUZZER DRIVE | On | Outputs the voltage to sound the lane departure warning buzzer. |
| Off | Stops the voltage to sound the lane departure warning buzzer. | |
| LDW ON IND | On | Outputs the voltage to illuminate the LDW ON indicator (on the LDW switch). |
| Off | Stops the voltage to illuminate the LDW ON indicator. | |
| LDP ON IND | On | Requests the LDP ON indicator lamp ON [on the combination meter (Green)] to combination meter (through unified meter and A/C amp.) via CAN communication. |
| Off | Stops the illumination request. | |
| LANE DEPARTURE W/L | On | Requests the lane departure warning lamp ON [on the combination meter (Yellow)] to combination meter (through unified meter and A/C amp.) via CAN communication. |
| Off | Stops the illumination request. |
NOTE:
"Active test" of indicator/warning lamp cannot be performed when applicable indicator/warning lamp is turned ON.