Work Support
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
WORK SUPPORT TABLE
| Work support item | Function |
|---|---|
| CAUSE OF AUTO-CANCEL | Indicates causes of automatic cancellation of the LDP. |
| AUTO AIM | Outputs camera unit, calculates dislocation of the camera, and displays adjustment direction. Refer to DESCRIPTION . |
| AIM CHECK |
NOTE:
The item is indicated, but not used.
|
Cause of Auto-Cancel Display Item List
When LDP control is canceled under the operating condition, "CAUSE OF AUTO-CANCEL" is memorized.
- Last five cancel (system cancel) causes are displayed.
- "CAUSE OF AUTO-CANCEL" displays the number of times of ignition switch ON/OFF up to a maximum of "39". "39" is kept even when the number exceeds "39". The number returns to 0 when detecting the same cancellation causes are detected.CAUSE DESCRIPTION
Cause of cancellation Description NO RECORD - Operating VDC/ABS VDC or ABS function was operated. Vehicle dynamics Vehicle behavior exceeds specified value. Steering speed Steering speed was more than the specified value in evasive direction. End by yaw angle Yaw angle was the end of LDP control. Departure yaw large Detected more than the specified value of yaw angle in departure direction. ICC WARNING Target approach warning of ICC system was activated. VDC OFF SW VDC OFF switch was pressed. CURVATURE Road curve was more than the specified value. Steering angle large Steering angle was more than the specified value. ICC main SW hold ON ICC MAIN switch was held ON for more than a certain period. Brake is operated Brake pedal was operated. Lateral offset Distance of vehicle and lane was detached in lateral direction more than the specified value. Lane marker lost Lane camera unit lost the trace of lane marker. Lane marker unclear Detected lane marker was unclear. Bank Road bank angle was more than the specified value. Yaw acceleration Detected yawing speed was more than the specified value. Deceleration large Deceleration in a longitudinal direction was more than the specified value. Accel is operated Accelerator pedal was depressed. Departure steering Steering wheel was steered more than the specified value in departure direction. Evasive steering Steering wheel was steered more than the specified value in the evasive direction. R range Selector lever was operated to R range. Parking brake drift Rear wheels lock was detected. Not operating condition Did not meet the operating condition (vehicle speed, turn signal operation, etc.).