LDW System Control Description
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- LDW system is controlled by lane camera unit.
- Lane camera unit monitors lane markers of the traveling lane.
- Combination meter turns the lane departure warning lamp ON/OFF according to the signal from the lane camera unit via CAN communication (through unified meter and A/C amp.).
- When the lane camera unit judges vehicle deviation from the traveling lane, it controls following actions to alert the driver.
- Requests the lane departure warning lamp activation to combination meter.
- Controls the lane departure warning buzzer.
LDW OPERATING CONDITION
- LDW ON indicator: ONNOTE: LDP ON indicator lamp is OFF.
- Vehicle speed: approximately 72 km/h (45 MPH) or moreNOTE: For details of LDW system operating conditions, refer to DESCRIPTION .
LDW OPERATION
| Input | Output | ||||
|---|---|---|---|---|---|
| Vehicle speed (Approx.) [km/h (MPH)] | Vehicle condition/Driver's operation | Action | LDW ON indictor | Indication on the combination meter | Buzzer |
| Less than 64 (40) | Close to lane marker | No action | ON | OFF | - |
| 72 (45) or more | Close to lane marker | Warning
|
ON | Short continuous beeps | |
|
No action | ON | OFF | - | |