AWD Warning Lamp Indication Condition
- Turns ON when there is a malfunction in AWD system. AWD warning lamp indicates the vehicle is in fail-safe mode.
- Also turns ON when ignition switch is turned ON, for the purpose of lamp check. Turns OFF approximately for 1 second after the engine starts if system is normal.
AWD WARNING LAMP INDICATION
| Condition | AWD warning lamp |
|---|---|
| Lamp check | Turns ON when ignition switch is turned ON. (Turns OFF approx. 1 second after the engine start.) |
| AWD system malfunction | ON |
| Protection function is activated due to heavy load to electric controlled coupling. (AWD system is not malfunctioning and AWD system changes to rear wheel drive.) | Quick blinking: 2 times/second (Blinking in approx. 1 minute and then turning OFF) |
| Large difference in diameter of front/rear tires | Slow blinking: 1 time/2 seconds (Continuing to blink until turning ignition switch OFF) |
| Other than above (system normal) | OFF |
CAUTION:
AWD warning lamp also turns ON due to data reception error, CAN communication error etc.