Component Inspection

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ASCD STEERING SWITCH

Turn ignition switch OFF.
Disconnect combination switch (spiral cable) harness connector M303.

Check resistance between combination switch harness connector terminals under the following conditions.

Combination switch		Condition	Resistance (Ω)
Connector	Terminals	Condition	Resistance (Ω)
M303	13 and 16	MAIN switch: Pressed	Approx. 0
		CANCEL switch: Pressed	Approx. 250
		SET/COAST switch: Pressed	Approx. 660
		RESUME/ACCELERATE switch: Pressed	Approx. 1, 480
		All ASCD steering switches: Released	Approx. 4, 000

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ASCD steering switch