Component Inspection
- CHECK MODE SELECT SWITCH (E-SUS MODE SELECT)
- Turn the ignition switch OFF.
- Disconnect mode select switch (E-SUS mode select) harness connector.
- Check the continuity between mode select switch (E-SUS mode select) connector terminals.
Mode select switch (E-SUS mode select) Condition Continuity Terminal 1 - 3 When mode select switch (E-SUS mode select): SPORT Existed When mode select switch (E-SUS mode select): AUTO Not existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace mode select switch (E-SUS mode select).