LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> FX37 Base, RWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 13 (Engine Control System - System Component Testing) >> Periodic Maintenance >> EVAP Leak Check >> Except For MEXICO >> EXCEPT FOR MEXICO: Inspection >> With Consult
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult

WARNING: This page is about a different car, the 2013 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. To locate the EVAP leak, install EVAP service port adapter (commercial service tool) and pressure pump to EVAP service port.
  2. Turn ignition switch ON.
  3. Select the "EVAP SYSTEM CLOSE" of "WORK SUPPORT" mode with CONSULT.
  4. Touch "START". A bar graph (Pressure indicating display) will appear on the screen.
  5. Apply positive pressure to the EVAP system until the pressure indicator reaches the middle of the bar graph.
  6. Remove EVAP service port adapter (commercial service tool) and hose with pressure pump.
    Fig 1: Checking EVAP Service Port And Adapter Using Pressure Pump
    G09001619Courtesy of NISSAN NORTH AMERICA, INC.
  7. Locate the leak using a leak detector (commercial service tool). Refer to "SYSTEM DIAGRAM ".
    Fig 2: Identifying Leak Detector
    G09001620Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals