Component Inspection
WARNING: This page is about a different car, the 2013 Infiniti FX37. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL PUMP
- Turn ignition switch OFF.
- Disconnect "fuel level sensor unit and fuel pump" harness connector.
- Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
Terminals Resistance (Ω) 1 and 3 0.2 - 5.0 [at 25°C (77°F)] Is the inspection result normal?
YES: INSPECTION END
NO: Replace "fuel level sensor unit and fuel pump". Refer to "REMOVAL AND INSTALLATION ".