DTC Detection Logic

NOTE:

If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "DTC LOGIC ".
If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to "DTC LOGIC ".

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210D	STARTER RELAY ON	IPDM E/R detects that the relay is stuck in the ON position even if the following conditions are met for about 1 second. Starter control relay ON/OFF signal from BCM Transmission range switch input	IPDM E/R