Bulb Check Action And Fail-Safe Indication
| Vehicle condition/Driver's operation | Blind Spot Warning/Blind Spot Intervention indicator | Warning buzzer | Indication on the combination meter |
|---|---|---|---|
| When DTC is detected | OFF | Beep | |
| When radar blockage is detected | OFF | Beep | Unavailable: Side Radar Obstruction |
| When the camera detects that the interior temperature is high | OFF | Beep | Unavailable: High Cabin Temp. |
| When the dynamic driver assistance switch is turned ON with settings of DCA system, LDP system and Blind Spot Intervention system OFF | OFF | - | Blink (Approx. 3 sec.) |
Fig 1: Blinking Cycle When Side Radar Blockage Condition Or Lane Camera Unit High Temperature Condition Exists
NOTE:
Time shown in the figure is approximate time.