Operating Condition
- Warning systems ON indicator: ON
- Vehicle speed: approximately 70 km/h (45 MPH) or more
- Turn indicator signal: After 2 seconds or more from turned OFF
NOTE:
- When the LDW system setting on the vehicle information display is ON.
- After the operating conditions of warning are satisfied, the warning continues until the vehicle speed reaches approximately 60 km/h (40 MPH)
- LDP ON indicator lamp is OFF
- The LDW system may not function properly, depending on the situation. Refer to "PRECAUTIONS FOR LANE DEPARTURE WARNING/LANE DEPARTURE PREVENTION ".
FAIL-SAFE INDICATION
| Vehicle condition/Driver's operation | Warning systems ON indicator | Indication on the combination meter |
|---|---|---|
| When DTC is detected (Except "C1B01" and "C1B03") |
ON | |
| Camera aiming is not completed ("C1B01" is detected)
NOTE:
This is detected while driving the vehicle and the indication remains ON until the ignition switch is turned OFF
|
ON | |
| When DTC is detected (Except "C1B01" and "C1B03") |
ON | |
| Camera aiming is not completed ("C1B01" is detected)
NOTE:
This is detected while driving the vehicle and the indication remains ON until the ignition switch is turned OFF
|
ON | |
| Temporary disabled status at high temperature ("C1B03" is detected) | OFF | Unavailable: High Cabin Temp |
| When the warning systems switch is pressed (When the settings of LDW system, FCW system, and BSW system on the vehicle information display are "OFF") |
Blink |