Error item
Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items
| Error item | Description | Possible cause |
|---|---|---|
| CAN COMM CIRCUIT | CAN communication malfunction is detected. | Perform diagnosis with CONSULT, then repair the malfunctioning components according to diagnosis results. Refer to CONSULT FUNCTION |
| CONTROL UNIT (CAN) | CAN initial diagnosis malfunction is detected. | Replace the AV control unit if the malfunction occurs constantly. Refer to AV CONTROL UNIT . |
| CONTROL UNIT (AV) | AV communication circuit initial diagnosis malfunction is detected. | |
| FLASH-ROM Error Of Control Unit | AV control unit malfunction is detected. | |
| CAN Controller Memory Error | ||
| Steer. Angle Sensor Calibration | Predictive course line center position adjustment of the steering angle sensor is incomplete. | Adjust the predictive course line center position of the steering angle sensor. Refer to ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION . |
| Display Connection Error | When any of the following is detected:
|
|
| XM Connection Error | When any of the following is detected:
|
|
|
When any of the following is detected:
|
|
|
When any of the following is detected:
|
|
|
AV communication circuit malfunction between AV control unit and A/C and AV switch assembly. | AV communication circuits between AV control unit and A/C and AV switch assembly. |