Front Wiper Drop Wipe Operation
- BCM controls the front wiper to operate once according to the conditions of the front wiper drop wipe operation.
Front wiper drop wipe operating condition
- Ignition switch ON
- Front wiper switch OFF
- Front washer switch OFF
- BCM transmits the front wiper request signal (LO) to IPDM E/R with CAN communication so that the front wiper operates once three seconds after the front wiper operation is linked with the washer.
- IPDM E/R turns ON the integrated front wiper relay according to the front wiper request signal (LO).
NOTE:
Factory setting of the front wiper drop wipe operation is ON. Front wiper drop wipe operation can be set to ON or OFF using CONSULT. Refer to
"WIPER: CONSULT FUNCTION (BCM - WIPER)
".