Active Test
CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems warning lamp is illuminated.
- ICC system warning lamp
- Lane departure warning lamp
- Blind Spot Warning/Blind Spot Intervention warning lamp
- IBA OFF indicator lamp (IBA system ON)
- Shift the selector lever to "P" position, and then perform the test.
| Test item | Description |
|---|---|
| BRAKE ACTUATOR | Activates the brake by an arbitrary operation |
| ICC BUZZER | Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
| METER LAMP | The ICC system warning lamp, MAIN switch indicator and IBA OFF indicator lamp can be illuminated by ON/OFF operations as necessary |
| STOP LAMP | The ICC brake hold relay can be operated by ON/OFF operations as necessary, and the stop lamp can be illuminated |
| ACTIVE PEDAL | The accelerator pedal actuator can be operated as necessary |
| DCA INDICATOR | The DCA system switch indicator can be illuminated by ON/OFF operations as necessary |
| LDP BUZZER | Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
| WARNING SYSTEM IND | Warning systems ON indicator (on warning systems switch) can be illuminated by ON/OFF operations as necessary |
| LDP ON IND | The LDP ON indicator lamp can be illuminated by ON/OFF operations as necessary |
| LANE DEPARTURE W/L | The Lane departure warning lamp can be illuminated by ON/OFF operations as necessary |
| BSW/BSI WARNING LAMP | The Blind Spot Warning/Blind Spot Intervention warning lamp can be illuminated by ON/OFF operations as necessary |
| BSI ON INDICATOR | The Blind Spot Intervention ON indicator can be illuminated by ON/OFF operations as necessary |
| LDW ON IND | The LDW ON indicator lamp can be illuminated by ON/OFF operations as necessary |
| LDP FAIL IND | The LDP fail indicator lamp can be illuminated by ON/OFF operations as necessary |
| LDW FAIL IND | The LDW fail indicator lamp can be illuminated by ON/OFF operations as necessary |
| BSW ON IND | The BSW ON indicator lamp can be illuminated by ON/OFF operations as necessary |
| BSI FAIL IND | The BSI fail indicator lamp can be illuminated by ON/OFF operations as necessary |
BRAKE ACTUATOR
NOTE:
The test can be performed only when the engine is running.
| Test item | Operation | Description | "PRESS SENS" value |
|---|---|---|---|
| BRAKE ACTUATOR | MODE1 | Transmits the brake fluid pressure control signal to the ABS actuator and electric unit (control unit) via CAN communication | 10 bar |
| MODE2 | 20 bar | ||
| MODE3 | 30 bar | ||
| Test start | Starts the tests of "MODE1", "MODE2" and "MODE3" | - | |
| Reset | Stops transmitting the brake fluid pressure control signal below to end the test | - | |
| End | Returns to the "SELECT TEST ITEM" screen | - |
NOTE:
The test is finished in 10 seconds after starting
ICC BUZZER
| Test item | Operation | Description | ICC warning chime operation sound |
|---|---|---|---|
| ICC BUZZER | MODE1 | Transmits the buzzer output signals to the combination meter via CAN communication | Intermittent beep sound |
| Test start | Starts the tests of "MODE1" | - | |
| Reset | Stops transmitting the buzzer output signal below to end the test | - | |
| End | Returns to the "SELECT TEST ITEM" screen | - |
METER LAMP
NOTE:
The test can be performed only when the engine is running.
| Test item | Operation | Description |
|
|---|---|---|---|
| METER LAMP | Off | Stops sending the following signals to exit from the test
|
OFF |
| On | Transmits the following signals to the combination meter via CAN communication
|
ON |
STOP LAMP
| Test item | Operation | Description | Stop lamp |
|---|---|---|---|
| STOP LAMP | Off | Stops transmitting the ICC brake hold relay drive signal below to end the test | OFF |
| On | Transmits the ICC brake hold relay drive signal | ON |
ACTIVE PEDAL
CAUTION:
- Shift the selector lever to "P" position, and then perform the test.
- Never depress the accelerator pedal excessively. (The engine speed may rise unexpectedly when finishing the test.)
NOTE:
- Depress the accelerator pedal to check when performing the test.
- The test can be performed only when the engine is running.
| Test item | Operation | Description | Accelerator pedal operation |
|---|---|---|---|
| ACTIVE PEDAL | MODE1 | Transmit the accelerator pedal feedback force control signal to the accelerator pedal actuator via ITS communication. | Constant with a force of 25 N for 8 seconds |
| MODE2 | Constant with a force of 15 N for 8 seconds | ||
| MODE3 | Change up to a force of 25 N for 8 seconds | ||
| MODE4 | Change up to a force of 15 N for 8 seconds | ||
| Test start | Starts the tests of "MODE1", "MODE2", "MODE3" and "MODE4" | - | |
| Reset | Stops transmitting the accelerator pedal feedback force control signal below to end the test. | - | |
| End | Returns to the "SELECT TEST ITEM" screen | - |
NOTE:
The test is finished in 10 seconds after starting
DCA INDICATOR
NOTE:
The test can be performed only when the engine is running.
| Test item | Operation | Description | DCA system switch indicator |
|---|---|---|---|
| DCA INDICATOR | Off | Stops transmitting the DCA system switch indicator signal below to end the test | - |
| On | Transmits the DCA system switch indicator signal to the combination meter via CAN communication | ON |
LDP BUZZER
| Test item | Operation | Description | Warning buzzer |
|---|---|---|---|
| LDP BUZZER | Off | Stops transmitting the warning buzzer signal below to end the test | - |
| On | Transmits the warning buzzer signal to the warning buzzer | ON |
WARNING SYSTEM IND
| Test item | Operation | Description | Warning systems ON indicator |
|---|---|---|---|
| WARNING SYSTEM IND | Off | Stops transmitting the warning systems ON indicator signal below to end the test | - |
| On | Transmits the warning systems ON indicator signal to the warning systems ON indicator | ON |
LDP ON IND
| Test item | Operation | Description | LDP ON indicator lamp (Green) |
|---|---|---|---|
| LDP ON IND | Off | Stops transmitting the LDP ON indicator lamp signal below to end the test | - |
| On | Transmits the LDP ON indicator lamp signal to the combination meter via CAN communication | ON |
LANE DEPARTURE W/L
| Test item | Operation | Description | Lane departure warning lamp (Yellow) |
|---|---|---|---|
| LANE DEPARTURE W/L | Off | Stops transmitting the lane departure warning lamp signal below to end the test | - |
| On | Transmits the lane departure warning lamp signal to the combination meter via CAN communication | ON |
BSW/BSI WARNING LAMP
| Test item | Operation | Description | Blind Spot Warning/Blind Spot Intervention warning lamp (Yellow) |
|---|---|---|---|
| BSW/BSI WARNING LAMP | Off | Stops transmitting the Blind Spot Warning/Blind Spot Intervention warning lamp signal below to end the test | - |
| On | Transmits the Blind Spot Warning/Blind Spot Intervention warning lamp signal to the combination meter via CAN communication | ON |
BSI ON INDICATOR
| Test item | Operation | Description | Blind Spot Intervention ON indicator lamp (Green) |
|---|---|---|---|
| BSI ON INDICATOR | Off | Stops transmitting the Blind Spot Intervention ON indicator signal below to end the test | - |
| On | Transmits the Blind Spot Intervention ON indicator signal to the combination meter via CAN communication | ON |
LDW ON INDICATOR
| Test item | Operation | Description | Lane Departure Warning ON indicator lamp (Yellow) |
|---|---|---|---|
| LDW ON INDICATOR | Off | Stops transmitting the Lane Departure Warning ON indicator signal below to end the test | - |
| On | Transmits the Lane Departure Warning ON indicator signal to the combination meter via CAN communication | ON |
LDP FAIL INDICATOR
| Test item | Operation | Description | Lane Departure prevention ON indicator lamp (Yellow) |
|---|---|---|---|
| LDP FAIL INDICATOR | Off | Stops transmitting the Lane Departure prevention ON indicator signal below to end the test | - |
| On | Transmits the Lane Departure prevention ON indicator signal to the combination meter via CAN communication | ON |
LDW FAIL INDICATOR
| Test item | Operation | Description | Lane Departure Warning ON indicator lamp (Yellow) |
|---|---|---|---|
| LDW FAIL INDICATOR | Off | Stops transmitting the Lane Departure Warning ON indicator signal below to end the test | - |
| On | Transmits the Lane Departure Warning ON indicator signal to the combination meter via CAN communication | ON |
BSW ON INDICATOR
| Test item | Operation | Description | Blind Spot Warning ON indicator lamp (Yellow) |
|---|---|---|---|
| BSW ON INDICATOR | Off | Stops transmitting the Blind Spot Warning ON indicator signal below to end the test | - |
| On | Transmits the Blind Spot Warning ON indicator signal to the warning lamp on the door | ON |
BSI FAIL INDICATOR
| Test item | Operation | Description | Blind Spot Intervention FAIL indicator lamp (Yellow) |
|---|---|---|---|
| BSI FAIL INDICATOR | Off | Stops transmitting the Blind Spot Intervention FAIL indicator signal below to end the test | - |
| On | Transmits the Blind Spot Intervention FAIL indicator signal to the warning lamp on the door | ON |