REAR RH: Diagnosis Procedure

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

1. CHECK ENCODER SIGNAL 
   1. Turn ignition switch ON.
   2. Check signal between rear power window switch RH harness connector and ground with oscilloscope.

      Signal name	(+)		(-)	Signal (Reference value)
      	Rear power window switch RH
      	Connector	Terminal
      Encoder signal 1	D356	12	Ground	Refer to following signal
      Encoder signal 2		15

      Fig 1: Rear Power Window Switch RH Encoder Signal Waveform

      Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: GO TO 2.

2. CHECK ENCODER SIGNAL CIRCUIT 
   1. Turn ignition switch OFF.
   2. Disconnect rear power window switch RH connector and rear power window motor RH connector.
   3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

      Rear power window switch RH		Rear power window motor RH		Continuity
      Connector	Terminal	Connector	Terminal
      D356	12	D304	4	Yes
      	15		6

   4. Check continuity rear power window switch RH harness connector and ground.

      Rear power window switch RH		Ground	Continuity
      Connector	Terminal
      D356	12		No
      	15

      Is the inspection result normal? 

      YES: GO TO 3.

      NO: Repair or replace harness.

3. CHECK ENCODER POWER SUPPLY 
   1. Connect rear power window switch RH connector.
   2. Turn ignition switch ON.
   3. Check voltage between rear power window motor RH harness connector and ground.

      (+)		(-)	Voltage (Approx.)
      Rear power window motor RH
      Connector	Terminal
      D304	5	Ground	12

      Is the inspection result normal? 

      YES: GO TO  5.

      NO: GO TO 4.

4. CHECK ENCODER POWER SUPPLY CIRCUIT 
   1. Turn ignition switch OFF.
   2. Disconnect rear power window switch RH connector.
   3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

      Rear power window switch RH		Rear power window motor RH		Continuity
      Connector	Terminal	Connector	Terminal
      D356	4	D304	5	Yes

   4. Check continuity between rear power window switch RH harness connector and ground.

      Rear power window switch RH		Ground	Continuity
      Connector	Terminal
      D356	4		No

      Is the inspection result normal? 

      YES: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

5. CHECK GROUND CIRCUIT 1 
   1. Turn ignition switch OFF.
   2. Check continuity between rear power window motor RH harness connector and ground.

      Rear power window motor RH		Ground	Continuity
      Connector	Terminal
      D304	3		Yes

      Is the inspection result normal? 

      YES: Replace rear power window motor RH. Refer to "REMOVAL AND INSTALLATION - REAR POWER WINDOW MOTOR ".

      NO: GO TO 6.

6. CHECK GROUND CIRCUIT 2 
   1. Disconnect rear power window switch RH harness connector.
   2. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

      Rear power window switch RH		Rear power window motor RH		Continuity
      Connector	Terminal	Connector	Terminal
      D356	3	D304	3	Yes

   3. Check continuity between rear power window switch RH harness connector and ground.

      Rear power window switch RH		Ground	Continuity
      Connector	Terminal
      D356	3		No

      Is the inspection result normal? 

      YES: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.