Component Inspection
- CHECK EOP SENSOR
- Turn ignition switch OFF.
- Disconnect EOP sensor harness connector.
- Check resistance between EOP sensor connector terminals.
EOP sensor Condition Resistance (kΩ) + - Terminal 1 2 None 4 - 10 3 2 - 8 2 1 4 - 10 3 1 - 3 3 1 2 - 8 2 1 - 3 Is the inspection result normal?
YES: INSPECTION END.
NO: Replace EOP sensor. Refer to "ENGINE CONTROL SYSTEM: COMPONENT PARTS LOCATION ".